CD/MP3 REMOTE CONTROL OPERATION
These buttons have the same functions as Skip Up/Search Forward button and Skip Down/
Search Backward button on the unit.
2. BACK/NEXT
1. PROGRAM,PLAY/PAUSE,STOP,REPEAT,SLEEP,TIMER,BAND,POWER,P-DOWN,
P-UP,VOL-,VOL+ buttons
These buttons have the same function as the relevant keys on the panel of the main unit.
Press INTRO button in play mode to start intro play mode. The unit will play each track for
10sec. Press INTRO button twice, then NORMAL play.
3. INTRO button
4. 0-9 NUMERIC buttons
Any track to be played can be selected by pressing 0-9 Track Number buttons. To select the
track which exceeds 10, just directly press the number. For example, to select 15, just press
"1" and "5". To select 10, press 1 and
" "
"0". To select 105, press "1" and "0" and "5".
5. MUTE button
Toggle between audio output On/Off.
6. EQ button
Press GEQ button to select EQ mode in the order:PASS,CLASSIC,ROCK,POP,JAZZ
7. MONO/ST button
Changing MONO/STEREO in FM band mode.
8. Random button
Press RANDOM button to start random play. Press again to resume normal play.
Symptom
Possible Cause
Solution
Radio
Compact Disc Player
Noise or sound
distorted on AM or
FM broadcasts.
Station not tuned properly for
AM or FM.
FM: Rod antenna is not
extended.
AM: The bar antenna is not
positioned correctly.
Retune the AM or FM
broadcast station.
Extend FM Rod antenna.
Reposition the unit until
best reception is obtained.
Set the BAND switch to
FM ST. Position.
Set Function switch to
RADIO.
FM STEREO indicator
does not light.
AM or FM, no sound.
The BAND switch is set to
FM position.
Function switch is not set to
RADIO.
Volume at minimum.
Increase Volume.
CD Player will not play.
Function switch is not set to CD.
CD is not installed or installed
incorrectly.
Set Function switch to CD.
Insert CD with label side up.
Wipe disc with cloth or use
another disc.
CD skips while playing.
Disc is dirty or scratched.
TROUBLESHOOTING
If troubleshooting( see above) does not eliminate malfunctioning, press the reset switch on the left side of the
unit. Resetting causes the unit to restore its factory default settings and results in all the setting made by the
user being deleted.
