19. DAMAGES REQUIRING SERVICE
- Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions.
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the
operating instructions as an improving adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the product to its normal operation.
e) When the product exhibits a distinct change in performance - this indicates a need for service.
20. REPLACEMENT PARTS
- When replacement parts are required, be sure the service technician has used replacement parts specified by
the manufacturer or have the same characteristics as the original part, Unauthorized substitutions may result in fire, electric shock or other
hazards.
21. SAFETY CHECK
- Upon completion of any service or repair to this product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
22. HEAT
- The product should be situated away from heat sources such as radiators, heat registers, stoves or other products (including
amplifiers) that produce heat.
SECURITY
Before operation, check if the voltage of the unit is in line with the local voltage.
Hold the plug to disconnect it from the mains outlet. Do not pull the power cord.
When the plug of the unit is connected to the mains outlet, the unit will be still connected to AC even of the power is turned off.
Disconnect the plug as soon as liquid or objects enter the unit. The unit cannot be used until being checked by experts.
Do not open the cabinet. Laser rays employed by the unit may damage eyes. Any servicing should be done by qualified service personnel.
PLACEMENT
Put the unit where ventilation is good enough to prevent overheating.
Never put the unit in direct sunlight or near heat sources.
Put the unit horizontally, never put any heavy object on the unit.
To protect the pickup, do not put the unit where there is much dust. If there is dust on the pickup, use a cleaning disc to clean it.
Refer to the operation instructions of the cleaning disc you bought.
CONDENSATION
Moisture will appear on the pickup lens in the following cases:
The unit is suddenly moved from a cold place to a warm place.
The unit is put in a room with a heater, or in cold air from an air - conditioner.
Use the unit in a humid place. In these cases, the unit cannot work. Unload the disc and leave the unit on for about one hour evaporates
the water.
CLEANING
Use soft cloth with a little neutral detergent to wipe the cabinet, panel and controls. Never use abrasive paper, polishing powder or solvent
like alcohol and gasoline.
HANDLING DISC
To keep the disc clean, do not touch the play sides of the disc.
Do not attach paper or ape to the disc.
Keep the disc away from direct sunlight or heat sources.
Store the disc in a disc case after playback.
CLEANING DISC
Before playback, wipe the disc outwards from the center with clean cloth.
Do not use any type of solvent such as thinner, benzine, commercially available cleaners or anti-static spray.
GB-2
PRECAUTIONS FOR UNIT
PRECAUTIONS FOR DISCS
CLASS 1 LASER PRODUCT
CAUTION!
HAZARDOUS LASER RADIATION WHEN
OPEN AND INTERLOCK FAILED OR
DEFEATED. AVOID EXPOSURE TO BEAM.
