Before you jump to the conclusion that it’s out of order !
When the set is not operating properly, one is apt to assume that the set is faulty. There are
however, many possible faults which are not directly attributable to the set itself. It is
recommended to check the following before taking the set to a dealer.
Symptom
No AC power
No DC power
Tape does not run when a button is pressed
Cassette cannot be inserted
No recording
Deteriorated sound or irregular tape speed
Slow tape speed or low volume
Disc is not played
Player does not operate correctly; sound is
interrupted, noise occurs and tracks cannot
be selected.
Player does not operate normally when
control buttons are pressed.
Cause
Is the power cord connected property?
Are the batteries property inserted in the
battery compartment?
Are the batteries exhausted?
Is the batteries upside down?
Is the Pause button pressed? If so, unlock and
release.
Are the accidental-erasure prevention tabs
punched out? If so, cover the holes with plastic
tape.
Clean heads, capstan ans pressure roller with
a cleaning stick.
Are the batteries exhausted?
Is the disc loaded upside down?
Is the disc scratched or warred?
Is the pick-up lens dirty? If so, clean it with a
cleaning stick.
Is the disc scratched or otherwise flawed?
Is the disc soiled?
First press the Stop button then play disc
again.
Power
T
ape Recorder
CD Player
RESET:
The unit if Hang up, please press Reset button once, then turn on Power.
E5
