Page 4
* When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved
only when traffic program identification code has been received.
When TA is ON, traffic program identification code is not received during specified time.
14.AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressed briefly, AF switching mode is selected, and the state of AF mode
is displayed .
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of AF all
the time. The interval of checking time of each AFs depends on the signal strength
of current station, from a few minutes for a strong station to a few seconds for
weak station.
Every time that new AF is stronger than current station, it switches over to that
frequency for very short time, and NEW FREQUENCY is displayed for 1-2 seconds.
Because the mute time of AF switching or checking time is very short, it is almost
inaudible in case of normal program.
During FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only
receive and save RDS programs.
15. AS/PS BUTTON (Auto-storage /Preset scan)
During radio mode:
1) When press and hold for more than 1 second, the radio searches from the current
frequency and checks the signal strength level until 6 station are found. And then
the 6 stations frequency are preset to the corresponding preset memory numbered
bank. The auto-storage operation is implemented in the each selected band. When
the auto-storage operation is finished, the radio execute the Preset scan.
2) When briefly pressing, the radio searches for each preset station in the current
band and holds at that preset number for 5 seconds with releasing mute, and then
search again.
During SD/MMC or USB mode:
Press the AS/PS button, it is activated selecting TRACK SEARCH mode:
In TRACK SEARCH mode, the LCD will display TRK T "0" and flash the biggest
digit 0 that the SD/MMC card or USB stick contain.
Then press the VOL+ or VOL- button to select the number of the flashing digit from
0 ~ 9. Then press SEL button to confirm the number and flash next smaller digit 0.
With the same means, select the number of the flashing digit with VOL+/-.
After finishing selecting the number of all flashing digit, press SEL button to play
the track of the selected serial number.
Press the AS/PS button twice, it is activated selecting TRACK SEARCH mode:
In FIRST CHARACTER SEARCH mode, the LCD will display A--......, If there are
files names its first character are A , the ......is the first file name its first character
is A by the order of A~Z and 0~9; otherwise, the ......is NONE. (If there are some
songs in character A, press the >>I and I<< to select your favour.)Then press the
VOL+ or VOL- button to select file
’
s first character by the order of A~Z and 0~9.
Press the AS/PS button thrice, it is activated selecting TRACK SEARCH mode:
In DIRECTORY SEARCH mode, the LCD will display the root folder(if there is not
the root folder, it will find a root folder named ROOT). Then press the VOL+ or VOL-
button to select your desired folder and then press >> | or |<< button to select your
desired track in the folder.
Page 7
TROUBLE SHOOTING
Common Symptoms
There is no power.
Cause
The fuse has blown.
The volume control is set too low.
There is no sound.
The operation keys
do not work
The antenna cable is not connected.
Insert the antenna cable firmly into the
antenna socket of the device.
No radio reception.
The built-in microcomputer is not
operating properly due to noise
Switch the device off and on again. Or press
the RESET button to resume the program.
The device has not been correctly
connected.
Turn up the volume properly.
Check the power and earth connection
according to the wiring diagram.
Replace another fuse according to the wiring
diagram.
The car ignition is switched off.
If the power supply is properly connected to
the car accessory, switch the ignition key to
ON or " ACC
"
"
" .
Solution
In automatic search
mode the radio does
not stop at a trans-
mitting station.
Tune in to a radio station manually.
The transmission signals are too
weak.
