17
COMPOINT-LIB manual, Version 1.0
Configuration with TELNET
Configuration of the COMPOINT-LIB
10
Point 6, the “ISDN - Bridge Menu“
1 = Protocol
With the selection 1 – A you can determine your proper ISDN protocol settings. All
parameters which are entered here will be transferred before establishing a
connection to the AT Emulation of the ISDN board. The first 5 protocols are already
predefined but they can be overwritten.
Example
Protocol 1 = (**TEI=1;) = TEI=1(**DHTC=1;) = 1 virtual channel, (B21) = X.31 D-channel
Protocol 2 = (**TEI=1;) = TEI=1(**DHTC=2;) = 2 virtual channels, (B21) = X.31 D- channel
Protocol 3 = (**TEI=1;) = TEI=1(**DHTC=5;) = 5 virtual channels, (B21) = X.31 D- channel
Protocol 4 = (**HTC=1;) = 1 virtual channel (B20) = X.25 B- channel
Protocol 5 = (**HTC=10;) = 10 virtual channels (B20) = X.25 B- channel
Example for a X.31 connection:
ATE0W1S0**TEI=1;**DHTC=1;B21.
The AT command sequence ATE0W1S0 will prepend each dialing.
Important:
Please also refer to our manual “handbuch_isdn.pdf.pdf“ for further information
about our AT commands.
B = Input TimeOut
C = Output TimeOut
D = Output Lenght
serve for flow control and shall only be changed if required.
E = Allowed incoming MSN=
Here you can enter all admitted incoming MSNs separated by semicolon (;) (40
digits).
Example:
E=NONE or E=0897788332211 ;06912348999
As there will never be an MSN called “NONE” you will not be able to access the
COMPOINT – LIB from outside.
=========================== ISDN-BRIDGE MENU ================================
1 = Protocol 1 = **TEI=1;**DHTC=1;B21
2 = Protocol 2 = **TEI=1;**DHTC=2;B21
3 = Protocol 3 = **TEI=1;**DHTC=5;B21
4 = Protocol 4 = **HTC=1;B20
5 = Protocol 5 = **HTC=10;B20
6 = Protocol 6 =
7 = Protocol 7 =
8 = Protocol 8 =
9 = Protocol 9 =
A = Protocol 10 =
B = Input TimeOut *10ms = 0
C = Output TimeOut*10ms = 0
D = Output Lenght = 128
E = Allowed incoming MSN=
O = OUTGOING CALLS
I = INCOMING CALLS
S = STATUS
For example:'1=1234567'
-----------------------------------------------------------------------------
[Q = QUIT] Please enter your choice:
