13
COMPOINT-LIB manual, Version 1.0
Configuration with TELNET
Configuration of the COMPOINT-LIB
Konfigurieren von COMPOINT-LIB
4
Point 1, the “Ethernet Menu“
1=Mac – address :
Here the current MAC address of the interface is shown. We disadvise you to change this
value otherwise it may lead to problems with other network adapters.
2=IP – address :
With this item you can change the IP address.
Example:
2=192.168.0.1
3=SubnetMask:
Here you can change the Subnet mask.
Example:
3=255.255.255.0
4=Name of interface:
If you are using the DNS you can enter the DNS name here.
Example:
4=XT-Micro
5=DHCP Y/N:
If the DHCP is to be used this item has to be set to Y (YES)
Example:
5=Y
6=Boot/P Y/N:
If the Boot/p is to be used this item has to be set to Y (YES)
Example:
6=Y
7=Porttimeout :
Determine when the inactive connection must be terminated, enter the value in seconds.
Example:
7=25
8=Standard Gateway :
If there is a Gateway please enter it here.
Example:
8=192.168.0.25
9=Secondary Gateway : If there is an additional Gateway please enter it here.
Example:
9=192.168.0.26
A=DHCP Server :
If the IP address of the DHCP server is known please enter it here.
Example:
a=192.168.0.35
B=DNS Server1 :
Enter here the IP address of your DNS server.
Example:
b=192.168.0.66
C=DNS Server2 :
If there is a 2. DNS server please enter it here.
Example:
c=192.168.0.67
D=DNS Domain :
If ther is a Domain please enter it here.
Example:
d=musterdomain.de
E=Ethernet Speed :
Here you can determine which Ethernet speed will be used by your interface.
The following entries are available:
e=10HALF
10Mbit Half/duplex
e=10FULL
10Mbit Full/duplex
e=100HALF
100Mbit Half/duplex
e=100FULL
100Mbit Full/duplex
e=AUTO
AUTO sensing
Under the menu item “IN USE” all used values are being shown.
To quit the menu enter q for quit. All modified values will be saved automatically.
=========================== ETHERNET MENU ===================================
1 = MAC - Address = 08-BB-CC-00-90-01
2 = IP - Address = 100.100.100.155
3 = SubnetMask = 255.255.255.0
4 = Name of Interface = XT-00-80-00-S1
5 = DHCP Y/N = Y
6 = BOOT/P Y/N = N
7 = Port Timeout = 30
8 = Standard Gateway = 0.0.0.0
9 = Secondary Gateway = 0.0.0.0
a = DHCP Server = 0.0.0.0
b = DNS Server1 = 0.0.0.0
c = DNS Server2 = 0.0.0.0
d = DNS Domain =
e = Ethernet Speed = AUTO
IN USE
Gateway1,Gateway2 = 100.100.100.1 , 0.0.0.0
DHCP Server = 100.100.100.1
DNS Server1,Server2 = 100.100.100.1 , 0.0.0.0
DNS Domain =
For example:'2=100.99.88.7'
-----------------------------------------------------------------------------
[Q = QUIT] Please enter your choice:
