22
AK-SecurePowerSwitch Manual,
Configuration
Expert configuration
Log in by entering the administrator name in order to perform continuing or special
configurations. To do so, click on the button
“Log out”
in the top menu and then click
again on the button
“Monitor”.
Then you will be asked to enter a user name and the password. Do not use your standard
user name, but “AKIF” and the last three digits of the MAC address. The MAC address
can always be found on the device label of the
SecurePowerSwitch
. This label is
positioned at the bottom of the device.
In this example :
AKIF666666
and your
standard
password.
