The system can also automatically deactivate
devices when the set number of alarms is
exceeded
Unpair Device
Unpairs the detector, disconnects it from the hub,
and deletes its settings
Indication
The DualCurtain Outdoor LED indicator can light red or green, depending on the
state of the detector.
Indication upon pressing the power button
Indication
Event
Lights red while the button is pressed
Pressing the power button when the detector is
on
Lights green while the device is being activated
Activation
First lights red, then blinks three times and turns
off
Deactivation
Enabled detector indication
Indication
Event
Lights up green for 1 second
Alarm, masking, or tamper activation
Blinks red after the rst power on
Hardware error. The detector requires repairing,
please contact
Blinks red in a few minutes after installing in
SmartBracket
Calibration was not successful — something was
obstructing the detector’s view during calibration,
or it was not installed correctly. Recalibrate the
Summary of Contents for DualCurtain Outdoor
Page 34: ......
