AJAX AJ-FIRE, User Manual

Page: 16 / 20

If LED doesn’t blink after fi xing in SmartBracket, check the status of the tamper
in the and then the fi xing tightness of the panel.
If someone detaches the detector from the surface or takes it off the
attachment panel, the security system noti
fi es you.
Do not install the detector:
Use double-side adhesive tape only for temporary attachment of the detector. The
tape runs dry with time, which can cause falling, false triggering, and detector
malfunction.
2. Put the detector on the attachment panel by turning it clockwise on
SmartBracket. When the detector is
fi xed in SmartBracket, it blinks with LED,
signaling that the tamper is closed.
1. outside the premises (outdoors);
2. nearby any metal objects or mirrors causing attenuation or screening of the
signal;
3. at any places with fast air circulation (air fans, open windows or doors);
4. closer than a meter to the cooking surface;
5. inside premises with the temperature and humidity beyond the range of
permissible limits;