7. If necessary, activate the
Ignore First Alarm
option. This setting is
recommended for premises with potential sources of false alarms. For example,
if the device is installed in a place where dust or steam can get into the detector.
The option functions as follows:
1. The detector reports a smoke alarm.
2. The built-in 30-second timer of the detector starts.
3. If after 30 seconds the detector still detects a threat, an alarm is sent to the
hub.
Event
Indication
Detector switching on
The logo lights up green for 1 second
Detector switching off
The logo blinks red three times and the device
switches off
Registration failed
The logo blinks green for a minute, then the
device switches to the autonomous mode
Smoke or temperature increase detected
The siren switches on, the logo lights red during
the
fi
re/smoke alarm
One short sound signal per 90 sec — main
batteries low (CR2)
Summary of Contents for AJ-FIRE
Page 20: ......
