Switch on the device, wait until loading, and check the external power status in
the Ajax app. If there is no power, and you are using a terminal adapter, check
9. Reassemble the boards and the device body then tighten the screws.
Check that the battery and its cables are not clamped. When installed properly, the
boards stand firmly on all guides and do not stagger. Holding the boards together
with the back lid, turn the device over. The SIM card slots, power, and Ethernet
sockets should match accurately and fit the corresponding sockets, and the power
button should not be stuck.
Change the information about input voltage on the device body to avoid incorrect
power connections in the future. Use the special bundled sticker with the
instruction.
10. Connect the power (and Ethernet cable) to the appropriate sockets.
11. Switch on the 6 V power source.
Do not connect the power cable with a voltage that exceeds the acceptable input
voltage.
12. Switch on the device by holding the power button for 2 seconds.
13. Close and fix the SmartBracket mounting panel.
