For the detection and interfacing to occur, the siren should be located within the
coverage area of the wireless network of the hub (at a single protected object).
If
the device was already assigned to another hub, switch off HomeSiren and then
perform the standard adding procedure.
Request for connection to the hub is transmitted for a short time at the time of
switching on the device.
If the connection to the Ajax hub failed, the siren will switch off after 6 seconds.
You may repeat the connection attempt then. To retry the connection, you do not
need to turn off the device.
The siren connected to the hub will appear in the list of devices of the hub in the
3.
Select
Add
— the countdown will begin.
4.
Switch on the device (by pressing on/off button for 3 seconds).
Summary of Contents for HomeSiren
Page 22: ......
