If the light indicator of the siren is not actuated after installation in SmartBracket,
check the tamper mode in the Ajax Security System application and then the
�
tightness of the device on the panel.
In case of any attempt to dismount the siren, you will receive the noti
�
cation.
Do not install the siren:
The double-sided adhesive tape may be only used for temporary attachment of the
siren. The tape will run dry in course of time, which may result in the falling and
damage of the device.
2.
Put the siren on the SmartBracket panel and turn it clockwise. When installing
in the attachment panel, the tamper will switch and the siren will blink with a
LED.
1.
outside the premises (outdoors)
2.
in places where the acoustic signal will be attenuated (inside furniture, behind
thick curtains, etc.)
Summary of Contents for HomeSiren
Page 22: ......
