AJA Ki PRO mini Installation & Operation Manual Download Page 9

Page: 9 / 106

KiPro Mini v4.2

www.aja.com

Avid DNxHD 36 is for high-quality offline editing at the original frame size, frame rate,
and aspect ratio and is only offered when working with 1080p format video.

NOTE:

SD video encoding using Avid DNxHD is not supported.

What’s In The Box?

When you unpack your Ki Pro Mini, you’ll find the following components:

• Ki Pro Mini CD-ROM—this CD contains documentation—including this manual you’re

reading (PDF format).

• Ki Pro Mini QuickStart Guide—contains brief instructions to a first time user to get the

unit up and running quickly.

• Ki Pro Mini Recorder.

• AC Adapter 110/220 with industry standard 4-pin XLR connector for supplying power

to the Ki Pro Mini. A standard North American line cord with 3-prong plug is included.

• Registration Sheet—allows you to register by mail or online (details provided).

Please save all packaging for shipping the Ki Pro Mini should you wish to do so.

Figure 1. Ki Pro Mini Shipping Box Contents

Ki Pro Mini
Documentation CD

Ki Pro Mini Quickstart Guide
and any Late-Breaking Bulletins

Ki Pro Mini Recorder

AC Adaptor and Line Cord

Ki Pro
Installation and Operation
Manual
in PDF format on CD

Warning!

Only use attachments and accessories specified and/or sold by the manufacturer.

Warning!

Read and follow all warning notices and instructions marked on the product or included
in the documentation.

USO

RESTRITO

Summary of Contents for Ki PRO mini











































































































Search results

Summary of Contents for Ki PRO mini

Reviews:

Brands by name

Popular brands

AJA Ki PRO mini, Installation & Operation Manual

Search results

Summary of Contents for Ki PRO mini

Reviews:

Brands by name

Popular brands