IP Mini-Converters JPEG 2000 IP Video/Audio Converters v1.0 26 www.aja.com
Config Screen for IPR-1G Models
Figure 12. IPR-1G-SDI Config Screen 1 of 2
The IPR-1G Config Screen, shown in two parts, has the parameters required for
the general operation of the IPR-1G Mini-Converters.
System Name -
Defines a name for the system and gives it a unique identifier.
This name is used when displaying systems through the web interface.
User Authentication -
Enable or disable user password authentication for the
web interface.
Identify LED -
Enables flashing of the Ethernet LEDs on the unit.
UPnP Host -
Enable or disable network discovery using Universal Plug and Play.
3G SDI Level -
Select Level A or Level B for the SDI Output if it is 3G.
NOTE: 3G SDI Level applies only to the IPR-1G-SDI model.
IGMP Version -
Internet Group Management Protocol Version.
NOTE: IGMP Version applies only to the IPR-1G models.
NOTE: Selecting the wrong IGMP version for your network may cause long delays
in processing multicast subscriptions. See your network engineer for more
information.
Dest IP Address -
(Required) The destination IP address of the stream.
• Default Value: 239.0.0.1
Source IP Address -
(Optional) The source IP address of the stream.
• Default Value: 239.0.0.1
• An empty value implies the source IP address of packets is to be ignored.
Destination Port -
(Optional) The UDP destination port of the stream.
• Value Range: 0 - 65535
• Default Value: 0
• A value of zero implies the destination port number of packets is to be
ignored.
