Hi5-Plus Mini-Converter v1.3r1
www.aja.com
6
I/O Connections
Figure 2. Hi5-Plus Converter Connections
NOTE:
The LOCK LED indicates valid input video by color. Off is no signal, green is SD video, red is HD
video, amber is 3G video.
User Controls
Mini-Config Control
Automatic input format detection configures the unit automatically to match input and
output video parameters. In most cases, manual configuration is not necessary.
Advanced Mini-Config control supports color space and bit depth adjustments, and
audio channel selection.
Configuration set via Mini-Config is stored in the Hi5-Plus unit through subsequent
power cycles.
Installation
Typically, Hi5-Plus installation consists of the following steps:
1. Ensure the converter is disconnected from power.
2. Connect video equipment to the converter BNC and HDMI connector.
3. Connect audio equipment to RCA connectors (optional)
4. Apply power to the converter (AJA power supply included).
5. The converter will now run using the default factory settings. If you wish to alter the
factory settings, you’ll need to:
• Install the AJA Mini-Config software on your computer
• Attach the converter via USB
• Make your changes using Mini-Config setup screens.
• This process is detailed in
“USB Control and Setup—Using AJA Mini-Config” on
.
USB
Port
SDI Input BNC
Signal
Presence
Lock LED
2 Channel
Unbalanced
Analog Audio
Out (RCA Jacks)
DC
Power
Input
Power
LED
HDMI
Output
Connector
