HA5-12G Mini-Converter v1.3 18 www.aja.com
Software Update Procedure
1. Check the AJA website for new AJA Mini-Config software for your Mini-
Converter. If new software is found, download it and uncompress the file
archive (zip). Here is the URL to use when checking:
http://www.aja.com/en/products/mini-converters/mini-config-software
2. Connect the Mini-Converter to a Mac or PC via a USB port on the computer
and run the new AJA Mini-Config software just downloaded.
3. Click on the Update tab screen.
4. Check the Installed version level against the Desired version level. If the
Desired is newer, then click the Update button to download the new
firmware to the Mini-Converter; progress will be shown via the “Progress”
thermometer bar.
Info Tab Screen
This screen provides basic information about the Mini-Converter. This information
is useful when calling AJA Support for service or technical support.
Name -
This field allows you to give your Mini-Converter a name. This can be
useful if you have several Mini-Converters attached to a Mac/PC via USB
so you can distinguish between them easily (especially if they’re the same
model).
Type -
This is the factory set model name of the Mini-Converter.
Assembly -
This is the factory assembly number.
Serial Number -
This is the factory set unique serial number of your Mini-
Converter. If you ever call AJA Support for service, you may be asked for this
number.
