OG-Fiber-Series openGear Card v1.1r1 7
www.aja.com
• SDI input SMPTE locked (green)
Single Channel Cards
• DC power detected (green)
• Signal present (green)
• SMPTE locked (green)
openGear and AJA
openGear is an open-architecture, modular frame system designed by Ross
Video and supported by a diverse range of terminal equipment manufacturers,
including AJA. Ross Video manufactures the frames, power supplies and network
cards for openGear.
AJA Video is a leading manufacturer of video interface technologies, converters,
digital video recording solutions and professional cameras, bringing high-
quality, cost-effective products to the professional, broadcast and post-
production markets. AJA products, including openGear cards, are designed and
manufactured at our facilities in Grass Valley, California.
Parts Supplied
Each OG-FIBER card is shipped with:
• OG-FIBER card in an ESD bag
• Fiber Rear Card
• SFP module in ESD bag
• BNC nuts and star washers
Installation
CLASS 1
LASER
PRODUCT
Warning! Active fiber-optic cables emit radiation invisible to the human eye. Do
not look directly at the end of an active fiber-optic cable or the fiber connector
on an OG-FIBER-2T, OG-FIBER-2T-MM, OG-FIBER-TR, OG-FIBER-TR-MM, OG-
FIBER-T, OG-FIBER-T-MM; these models are Class 1 Laser Products.
Summary
Installing an OG-FIBER card into a DFR-8321 or OG3 openGear frame consists of
the following steps:
1. Install a Rear Fiber Card into the frame.
2. Ensure the SFP module is removed from the Front Fiber Card.
3. Insert the Front Fiber card in the left (odd numbered) slot of the pair.
4. Install BNC connector retaining nuts and washers.
5. Insert the SFP module into the card from the rear of the frame.
6. Connect the BNC and Fiber cabling.