18
HOLD switch
Release HOLD.
→
a
When not using the unit, set HOLD to the hold
position.
→
b
Accidentally pressed buttons will not function.
If
e
PLAY/PAUSE is pressed while HOLD is set
to the HOLD position, “HOLd” flashes in the display.
Turning the power on
Press
e
PLAY/PAUSE.
Power is turned on and playback starts.
Note
“Err” appears on the display in the following cases:
– When you try to play the unit without a disc in the disc
compartment.
– When you play a disc placed upside-down or a defective
disc.
Standby mode
When an operation finishes, the unit goes into
standby mode until the auto power off function
automatically turns off the power.
To enter standby mode, press
e
PLAY/PAUSE
to start playback, then press
s
STOP/OFF/CHARGE.
s
STOP/OFF/CHARGE
e
PLAY/PAUSE
Summary of Contents for XP-V730
Page 46: ......
