Aiwa XDM-S500, Operating Instructions Manual

Page: 16 / 96

16-
GB
Repeat mode (continued)
z
Tips
• You can fast-forward or fast-rewind by rotating the
Shuttle switch, after the start point (A) is set. If the
track reaches the end while fast-forwarding, the end
point is set as point (B) and fast-forwarding continues.
A-B Repeat starts when you release the Shuttle switch.
If the track reaches the beginning while fast-rewinding,
it jumps to the end of the track, the end point is set as
point (B), and fast-rewinding continues.
• You can fast-forward or fast-rewind by rotating the
Shuttle switch, during A-B Repeat playback. If the
track reaches the track start/end while fast-forwarding
or fast-rewinding, playback is stopped (enters Standby).
A-B Repeat restarts when you release the Shuttle
switch.
To clear the start point (A) and end point
(B)
• Press the REPEAT button during A-B Repeat
playback.
• Press the MENU button during A-B Repeat
playback.
• Select the Group mode by pressing the GROUP/
TUNE MODE during A-B Repeat playback.
• Select the previous or next track by rotating the
Shuttle switch during A-B Repeat playback.
To cancel the A-B Repeat mode
Changing the Repeat mode in the menu screen
(page 14).
Playing specified
sentences repeatedly
(Sentence Repeat)
This function automatically detects only voice
data from the setting point and repeats the voice
data for setting counts. It is useful for learning a
foreign language.
z Tip
The default repeat counts setting is twice for one
sentence. But you can change the repeat counts setting.
Refer to “Setting the repeat counts” on page 17.
1
Select the Sentence Repeat mode
(SENTENCE Rep) (page 14).
2
Press the
Nx
button to start playback.
3
Press the REPEAT button to place the
setting point during playback.
The Portable IC Audio Player detects spoken
sections and non-spoken sections from the
set point, and Sentence Repeat starts. (The
spoken section is repeated once (during
detection), and the setting is counted.)
1 : 0 2 0 1 0
Notes
• You cannot use Sentence Repeat in the Group
mode, or when the current time is displayed.
• A spoken or non-spoken section of less than 1
second will not be detected.
• If a non-spoken section is not detected until the
track end, the track end point is recognized as a
non-spoken section and Sentence Repeat begins
from the previous spoken section.
To clear the setting point
• Press the REPEAT button during Sentence
Repeat playback.
• Press the MENU button during Sentence Repeat
playback.
• Select the Group mode by pressing the GROUP/
TUNE MODE during Sentence Repeat
playback.
• Select the previous or next track by rotating the
Shuttle switch during Sentence Repeat playback.
To cancel the Sentence Repeat mode
Changing the Repeat mode in the menu screen
(page 14).
Nx button
REPEAT button
Shuttle switch
to ( > ) to ( . )