37
A
B
[TV / Measuring device setting] H POS 60 simple adjustment
Adjustment menu number
MENU2-1
Input signal
NTSC cross hatch
SPEC
A=B
MODE
VIDEO
1. Input cross hatch signal with a pattern generator.
2. Use the or - key on the remote controller to adjust and position
the dot mark appearing in the center of the cross hatch screen to the middle
and to equalize the number of boxes appearing in the right and left sides of the
screen (A=B). (Fig. 2-2)
2-2. V POS 60 Adjustment of NTSC vertical position
[TV / Measuring device setting]
Adjustment menu number
MENU2-2
Input signal
NTSC mono-scope
SPEC
CRT center = mono-scope center line
MODE
VIDEO
1. Input LION mark signal with a mono-scope.
2. Use the or - key on the remote controller to adjust and match the
center lines appearing in the right and left edges of the mono-scope screen
with the CRT center mark. (Fig. 2-3)
[TV / Measuring device setting] V POS 60 simple adjustment
Adjustment menu number
MENU2-2
Input signal
NTSC cross hatch
SPEC
CRT center and the center of cross hatch are matched
MODE
VIDEO
1. Input cross hatch signal with a pattern generator.
2. Use the or - key on the remote controller to adjust and match the
dot mark appearing in the center of the cross hatch screen and the CRT center
mark. (Fig. 2-4)
2-3. V SIZE 60 Adjustment of NTSC vertical size
[TV / Measuring device setting]
Adjustment menu number
MENU2-3
Input signal
NTSC mono-scope
SPEC
Vertical scale: 3.5 to 4.5 (90% to 94%)
MODE
VIDEO
1. Input LION mark signal with a mono-scope.
2. Use the or - key on the remote controller to adjust the upper and
lower scales within the range specified in SPEC. (Fig. 2-5)
Fig.2-2 NTSC CROSS HATCH
Fig.2-3 NTSC MONO-SCOPE
Fig.2-4 NTSC CROSS HATCH
Fig.2-5 NTSC MONO-SCOPE
CENTER
