background image

pg. 10

SPECIFICATIONS

Input terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INPUT 1 jack
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INPUT 2 terminals
Input sensitivity/impedance. . . . . . . . . . . . . . . . . . . INPUT 1: 1 V/50 kilo ohms (at 60 Hz)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INPUT 2: 9 V/4.4 kilo ohms (L and R) (at 60 Hz)
Output terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPEAKERS OUT terminals
Power output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

FTC RULE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

120 watts, Min. RMS at 4 ohms, from 40 Hz to

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Hz, with no more than 1%  Total Harmonic
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Distortion
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 W (4 ohms, T.H.D. 1   at 60 Hz)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 W (4 ohms, T.H.D. 10   at 60 Hz)
Frequency response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Hz   200 Hz
Speaker type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bass reflex type
Speaker unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 cm (8 in.) (Magnetically shielded type)
Power requirement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz

Power consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 W
Dimensions (w/h/d). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295 x 340 x 430 mm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (11 5/8 x 13 1/2 x 17 in.)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.5 kg (25 lbs 6 oz.)
Supplied accessories. . . . . . . . . . . . . . . . . . . . . Connecting cord with RCA phone plugs (1)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Speaker cords (2)

Specifications and external appearance are subject to change without notice due to product improvement.

Back cover

8Z-YP1-903-11
990326BMI-U-6

Summary of Contents for TS-W60








Reviews: