background image

15

En

2

Prepare the source.

To record CD(s), select the CD function and load disc(s).
To record a radio broadcast, tune in to the desired station.
To record a tape, insert the source tape in DECK 1 and
select the TAPE function (DECK 1).
To record from connected external equipment, select the
VIDEO/AUX function and prepare the equipment.

3

Press 

w

REC/REC MUTE to start recording.

When recording a CD or tape, playback starts
automatically.
When recording input from connected equipment,
manually start playback of the source.
On the remote control, press REC MODE and then press

w

REC/REC MUTE within 3 seconds.

• You can also change the source by pressing REC MODE

repeatedly before pressing 

w

REC/REC MUTE.

•Volume or tone adjustment does not affect recording.
•"

CAN'T REC

" is displayed if you attempt to record a tape

with the tab broken off.

To stop recording

Press 

s

.

To pause recording (only for TUNER or VIDEO/AUX
source)

Press 

a

. Press again to resume.

To record a selected set of tracks from a CD

Program the desired tracks (see "Programmed playback") and
then press 

w

REC/REC MUTE.

To record a 4-second blank space (only for TUNER
or VIDEO/AUX source)

1 Press 

w

REC/REC MUTE during recording or in recording

pause mode.
"

REC

" flashes on the display for 4 seconds (a blank space

is made in the meantime) and then the unit enters recording
pause mode.

To record less than a 4-second blank space, press 

w

REC/

REC MUTE again while "

REC

" flashes.

To record more than a 4-second blank space, press 

w

REC/

REC MUTE again after the unit enters recording pause mode.
Each time the button is pressed, a 4-second blank space is
added.

2 Press 

a

 to resume recording.

To erase a tape

1 Insert the tape in DECK 2. Set the tape to the desired point if

needed.

2 Press DECK1/2 to select "

T2

".

3 Press 

w

REC/REC MUTE.

Whole tape dubbing

1

Turn the Dial Function to select the TAPE function.

2

Insert the original tape in DECK 1 and the
recording tape in DECK 2.

3

Press SYNC DUB.

The tapes are rewound to the beginning of the front side
and recording starts.

• Dubbing cannot start from a point halfway in the tape.
• Only one side of the tape can be recorded at a time.

To stop dubbing

Press 

s

.

Edited CD recording

AI Edit Recording

When recording a whole CD, AI Edit Recording takes the length
of your tape into account and rearranges the recording order of
the tracks if necessary, so that no track is cut short at the end
of the side. Prepare a tape long enough to record the CD.

1

Insert the recording tape in DECK 2.

2

Turn the Dial Function to select the CD function
and load disc(s).

3

Press SHIFT+CD EDIT/CHECK once on the remote
control.

"

EDIT

" is displayed and "

AI C-00

" appears on the

display.

4

Press DISC DIRECT PLAY 1-3 to select a disc.

5

Press the numbered buttons on the remote
control to enter the length of the recording tape.

10 to 99 minutes can be specified.
- For a 60-minute tape press 6 and 0.
In a few seconds, the unit determines the tracks to be
recorded for each side.
The recording time left for side A appears on the display.

f

g

 or MULTI JOG can also be used to specify

tape length.

6

Press 

w

REC/REC MUTE to start recording on

side A.

On the remote control, press REC MODE and then press

w

REC/REC MUTE within 3 seconds.

The tape is rewound to the beginning of side A and
recording starts.
Go to the next step when recording on side A finishes.

7

Press SHIFT+CD EDIT/CHECK once on the remote
control.

The recording time left for side B appears on the display.

8

Turn over the tape and press 

w

REC/REC MUTE

to start recording on side B.

On the remote control, press REC MODE and then press

w

REC/REC MUTE within 3 seconds.

•AI Edit Recording cannot be used with discs with more than

30 tracks. "

TR OVER

" is displayed.

•Recording cannot start from a point halfway in the tape.

Summary of Contents for NSX-D70























Reviews: