4
En
Remote control
Detach the battery compartment lid at the rear of the remote
control and insert two R6 (size AA) batteries with correct
polarity.
•Replace the batteries with new ones when the operational
distance between the remote control and main unit becomes
shorter.
•Remove the batteries if the remote control is not going to be
used for an extended period of time.
•The remote control may not operate if it is used under intense
sunlight, etc., or if its line of sight is obstructed.
PREPARATIONS
Connection
Plug in the AC power cord to the AC outlet after all other
connections are made.
1
Connect the speaker cords to the main unit.
Connect the right speaker to the SPEAKERS R terminals
and the left to the SPEAKERS L terminals. The black-
striped cords go to the
0
terminals.
2
Connect the supplied antennas.
Connect the FM antenna to the FM 75
Ω
terminals and
the AM antenna to the AM LOOP jack. Connect the FM
antenna to the FM 75
Ω
terminal with the mark, as
illustrated.
R6(AA)
3
Connect the AC power cord to an AC outlet.
When the AC power cord is connected to an AC outlet for
the first time, the clock will flash on the display. For setting
the clock, see page 8.
Speakers
•Do not short-circuit the
0
and
9
speaker cord leads.
•Do not leave objects generating magnetism or objects
affected by magnetism near the speakers.
Antennas
Keep antennas away from metallic objects, electrical
equipment and cords.
•
FM antenna:
Extend fully and position for the best
reception. If reception is poor, connect an optional outdoor
antenna to the FM 75
Ω
terminals. When connecting an
optional outdoor antenna, be sure to connect the shield braid
of the antenna to the
2
terminal.
•
AM antenna:
Rotate to find the best reception.
FM antenna
AM antenna
