53
REFERENCE
Troubleshooting (Continued)
Symptom
Camcorder image is
not shown.
Camcorder image via
A/V input to the unit is
not shown on TV
screen.
Timer recording is not
possible.
indicator light
appears while the unit
is turned on.
Correction
• Turn camcorder on and operate properly.
• Press INPUT SELECT to select input
channel AV3.
• Set clock to correct time. See “Setting the
Clock Manually” on page 23.
• Reprogram Timer. See page 34 or 36.
• This is the normal indication that the unit is
in TIMER mode.
Cause
• Camcorder is off.
• Unit INPUT SELECT is not set to AV3.
• Clock in the unit is not set to correct time.
• Timer has been programmed incorrectly.
• The unit is in Timer Recording mode.
Moisture Condensation
Moisture condensation can occur:
In locations where moisture condensation may occur:
• When the unit is moved from a cold place to a warm
• Keep the unit plugged into an AC outlet with POWER On.
place.
This will help prevent condensation.
• Under extremely humid conditions.
• When condensation has occurred, wait a few hours for
the unit to dry before using it.
If a malfunction occurs
Turn off the power and disconnect the AC power cord from
the AC outlet. Then reconnect the AC power cord after
leaving the unit for more than 10 seconds.
PM/HV-DH1(EH)/Eng/52-58
4/16/03, 5:16 PM
53