Aiwa CSD-A660 Operating Instructions Manual Download Page 9

ENGLISH

  9

En

If an erroneous display or malfunction occurs

Make sure that none of the deck operation buttons is
pressed.
Press 

s

 while pressing TAPE/POWER/

6

STANDBY.

If the unit cannot be reset in the way above, disconnect
the AC cord and remove all the batteries to turn off the
display.
Leave the unit for a while and turn the power back on.

Specifications

Tuner section

Frequency range, antenna — FM: 87.5 - 108.0 MHz
Rod antenna, AM: 530 - 1,710 kHz Ferrite bar antenna

Deck section

Track format — 4 tracks, 2 channels / Frequency range
— Normal tape: 50 - 12,500 Hz (EIAJ) / Recording
system — AC bias / Erasing system — Magnet erase /
Heads — Recording/playback head (1), Erasure head
(1)

CD player section

Disc — Compact disc / Scanning method — Non-
contact optical scanner (semiconductor laser)

General

Speaker — 100 mm cone type (2) / Output —
Headphones jack (stereo mini-jack) / Power output —
2.5 W + 2.5 W (EIAJ 7 ohms, T.H.D. 10% DC) / Power
requirements — DC 12 V using eight size C (R14)
batteries, AC 120 V, 60 Hz / Power consumption — 15
W / Dimensions (W 

×

 H 

×

 D) — 414 

×

 183 

×

 235 mm

(16

3

/

8

 

×

 7

1

/

4

 

×

 9

3

/

8

 in.) / Weight — 3.2 kg (7 lbs. 1 oz.)

(excluding batteries) / Accessory — Remote control (1),
AC cord (1)

Specifications and external appearance are subject to
change without notice.

COPYRIGHT

Please check the copyright laws relating to
recordings from disc, radio or external tape for the
country in which the machine is being used.

Summary of Contents for CSD-A660











Reviews: