Aiwa AW-LED50X8FL, Operation Manual

Page: 14 / 36

Connecting an external device with AV output
Getting started
Powering the TV set on and off
Powering on
Check that the TV is in standby mode. This means the mains cable must be connected to a
working mains socket.
Powering off
To power the TV off, either press the Power button on the device or press the button
on the remote control.
After use
Cleaning
Warning: Make sure the device is unplugged from the mains power before
cleaning. Otherwise, there is a risk of electrocution!
Never spill or spray any type of liquid into the unit. Only use a clean, dry cloth for cleaning
the casing. Never use aggressive liquids. When very dirty, use a slightly dampened cloth.
Clean the screen with a special cleaning cloth for screens.
Connecting a digital audio system
You can connect your TV set to a digital audio system.
Then press the power button on the device or the button on
the remote control to turn on the TV.
Sending the TV'S digital audio
signa to extemal audio equipment
via the Digital Audio Output port.
Connect external devices
via the AV IN jack directly to
TV by using a Mini
cable.
In order to play the audio and
video signal fed in from the
external device on the TV,
select the signal source “AV”.
AV
12