QUICK INSTALLATION GUIDE FOR GOLDEN SCOOTER
Page 1 of 2
Required Tools
The following tools will allow you to make all comfort adjustments to your power chair.
•
Sockets/Wrenches - 17mm, 14mm, 13mm, and 10mm.
•
Allen Wrenches - 8mm, 6mm, 5mm, 4mm, and 3mm.
Power Installation
1. Remove the battery cover and body shroud by lifting them straight up and off the power
chair. See Figure 2.
2. Plug the power cable into the VR2 power module. See Figure 3.
3. Replace the shrouds. Make sure not to pinch the joystick control cable. See Figure 4.
4. Connect the joystick control to the VR2 power module. See Figure 5.
