AIT Worldwide Logistics, Inc.
QUICK INSTALLATION GUIDE
FOR GOLDEN SCOOTER
Page 2 of 3
Seat Installation
1.
Fold the seat back down.
2.
Grasp the seat firmly on each side, lift the seat and align the
seat pin with the hole in the seat post receiver. See Figure 6.
3.
Insert the seat into the seat post.
4.
Push down on the seat to lock into place. Move the seat from
side to side to make sure it is locked into place.
Headrest Installation
1. Align the headrest with the holes in the seat back.
2. Push in on the headrest clamp and push down on the headrest
to insert it into the seat back. See Figure 7.
Arm and Seat Belt Installation
1. Remove the arm width adjustment screw from the arm receiver tube at the bottom rear
of the seat frame. See Figure 8.
2. Insert the arm into the arm receiver tube, so that the arm pad faces toward the front of
the unit. Adjust the width of the arm.
3. Insert the arm width adjustment screw through the seat belt anchor, and secure by
tightening the adjustment screw. See Figure 9.
4. Repeat steps 1 - 3 for the opposite side.
