manualshive.com logo in svg

Aison STE12L-C, Instruction Manual, Page: 4 / 34

Share
Download
Aison STE12L-C Instruction Manual Download Page 4

 

 

 

                                                                                                                                                                                                                         

Instruction manual 

- 1 -

1.GENERAL 

This sterilizer described in this manual is intended for the sterilization of re-usable 

surgical instruments and material. 

It operates automatically with 134℃ and 121℃ sterilization temperatures. The 

sterilizer is a Medical device class Ⅱa, in accordance with article 15-Appendix Ⅸ of 

the European Directive 93/42/CEE and it has been produced in accordance with the 

EN13060. 

 

 

 

1 Distilled water tank                                                            9 Air filter 

2 LCD screen                                                                        10 Safety valve   

3 Control panel                                                                    11 Condenser ventilation 

4 Main switch                                                                        12 Printer port   

5 Main fuses                                                                          13 Power supply cord 

6 Drain connector of distilled water tank                      14 Rating plate 

7 Door handle   

8 Drain connector of used water tank   

     

Summary of Contents for STE12L-C



































Reviews:

No comments