manualshive.com logo in svg

AIS IP10IA99 series, User Manual

Share
Download
AIS IP10IA99 series User Manual Download Page 3

OIC Panel 10

”

/15

”

/17

”

- User Manual (Ver.1.02)

Page 2

Table of Contents

1. Introduction -----------------------------------------------------------------------------------------

5

1.1. Symbols used in this Manual -----------------------------------------------------------------------------------------7

2. Important Instructions

----------------------------------------------------------------------------------------------8

2.1. Note on the Warranty ---------------------------------------------------------------------------------------------------------- 8
2.2. Exclusion of Accident Liability Obligation----------------------------------------------------------------------------------- 8
2.3. Liability Limitation / Exemption from the Warranty Obligation ------------------------------------------------------ 8

3. Safety Instructions

-------------------------------------------------------------------------------------------------------------- 9

3.1. Electrostatic Discharge (ESD) ------------------------------------------------------------------------------------------------- 10
3.2. Grounding Methods -------------------------------------------------------------------------------------------------------------- 10
3.3. Instructions for the Lithium Battery ----------------------------------------------------------------------------------------- 10
3.4. FCC Statement--------------------------------------------------------------------------------------------------------------------- 10
3.5. Electromagnetic Compatibility ------------------------------------------------------------------------------------------------- 11

4. Goods of Delivery

--------------------------------------------------------------------------------------------------------------- 12

4.1. Label and Product Identification---------------------------------------------------------------------------------------------- 13

5. Product Description

-----------------------------------------------------------------------------------------

15

5.1. Front Side --------------------------------------------------------------------------------------------------------------------------- 17
5.1.1.10.4"/15"/17” Display with Touch Screen -------------------------------------------------------------------------------- 18
5.1.2. Front Panel Care and Cleaning (Chemical Resistance) ------------------------------------------------------------- 18
5.2. Bottom View ---------------------------------------------------------------------------------------------------------------------- 19
5.3. Power, Control Indicators, Reset and Grounding------------------------------------------------------------------------- 20
5.3.1. Power Connector …. ----------------------------------------------------------------------------------------------------------- 20
5.3.1.1. Power Button and Power LED -------------------------------------------------------------------------------------------- 20
5.3.1.2. Reset Button ------------------------------------------------------------------------------------------------------------------ 22
5.3.1.2. HDD LED ----------------------------------------------------------------------------------------------------------------------- 22
5.3.2. Interfaces (Rear, Bottom Side of the System) ------------------------------------------------------------------------ 22
5.3.2.1. USB Connectors -------------------------------------------------------------------------------------------------------------- 23
5.3.2.2. COM Serial Interface Connector ----------------------------------------------------------------------------------------- 23
5.3.2.3. LAN1 and LAN2 Ethernet Interface Connectors--------------------------------------------------------------------- 23
5.3.2.4. VGA Interface Connector -------------------------------------------------------------------------------------------------- 23
5.4. Top View----------------------------------------------------------------------------------------------------------------------------- 23
5.5. Left and Right Side View-------------------------------------------------------------------------------------------------------- 24
5.6. Rear View --------------------------------------------------------------------------------------------------------------------------- 25
5.7. DC or AC Power Connection.--------------------------------------------------------------------------------------------------- 25
5.7.1. DC Power Cable. --------------------------------------------------------------------------------------------------------------- 26
5.7.2. External AC/DC Adapter (Optional) -------------------------------------------------------------------------------------- 26
5.8. Accessing Internal Components --------------------------------------------------------------------------------------------- 27

6. System Installation

------------------------------------------------------------------------------------------------------------- 27

6.1. H/W Installation ------------------------------------------------------------------------------------------------------------------- 27
6.1.1. Jumpers --------------------------------------------------------------------------------------------------------------------------- 27
6.1.2. Connector------------------------------------------------------------------------------------------------------------------------- 30
6.1.3. Memory module Installation ---------------------------------------------------------------------------------------34

Summary of Contents for IP10IA99 series














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands