AIS DTW19T100-A1-PCT, User Manual

Page: 20 / 21

American Industrial Systems - DTW19T100-A1-PCT User Guide Page 20
Touch Screen Driver Installation
The monitor is available with USB connection. The Linux kernel 2.6.x (32 bit & 64 bit) touch
driver is located on the enclosed CD-ROM. HID for Windows® 7, VISTA , XP, 2000, ME, 98.
Please Note:
The system requires 15 seconds for Windows® 7 to install/uninstall the touch drivers while
turning power on/off or plugging/unplugging USB cable.
Driver Install Instructions:
If you are using a PC running driver Linux kernel 2.6.x (32 bit & 64 bit), follow the instructions
below:
1. Power on the PC.
2. Be sure the USB cable is connected from the PC to the LCD display.
3. Open the CD-ROM.
4. Follow the step-by-step instructions as shown on the pop-up windows.
If you are using a PC running Windows® XP Embedded, follow the instructions below:
Express:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Be sure that your EWF is disabled. If your EWF is enabled, please disable the EWF by using
the EWF Manager command.
4. Once the EWF is disabled click on the XP driver on the CD-ROM and follow the step-by-step
instructions as shown on the pop-up windows.
Custom:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the folder fi le on the CD-ROM.
If you are using a PC running Windows® CE, follow the instructions below:
1. Power on the computer.
2. Make sure that the USB cable is connected to the computer.
3. Using Platform Builder, build an image fi le by following the step-by-step instructions found
in the folder fi le on the CD-ROM.