IMPORTANT
After receiving the shipment, inspect the product thoroughly to ensure
that it has been shipped with care.
Before assembly make sure that the packaging contains all parts.
For service or parts replacement under warranty, the official sales
receipt is required. Please keep your official sales receipt for future
reference
Please contact us for any questions at
1-800-775-6524
before returning
this product.
Use a soft, clean and level surface to begin the assembly of your game table.
(Such as the inside of the cardboard box, carpet, etc.). This will prevent the
table surface from getting damaged. Make sure to remove any staples from
the cardboard box before using it as an underground.
This game table will be partially assembled upside down and then
turned over onto its legs.
When installing parts that have more than one screw or bolt, hand
tighten all screws or bolts in place before tightening with screwdriver
or allen key.
Electric screwdrivers may be helpful during assembly. However, please
set a low torque and use extreme caution because screws may be
stripped or over tightened if the electric screwdriver's torque is set too
high.
OFFICIAL SALES RECEIPT
CAN BE ATTACHED HERE
Service or parts under warranty
only available with show of receipt