Airzone OneZone, Installation Manual

Page: 9 / 24

9
EN
EN
FR
IT
PT
DE
Note: The indicated battery life is based on the original batteries shipped whit the Unit.
11. Programs. Displays the active program.
12. Manual mode. Indicates that the manual mode is activated. The manual mode allows to activate/deactivate the air
conditioning of the zone.
13. Automatic mode. Indicates that the Time schedule programming is activated.
14. Days of the week. Displays the current day of the week.
OPERATION MODES
The operation mode establishes how OneZone will operate while working on Cooling and Heating. This mode does not change
the AC unit mode, but it must remain the same at every moment. So, it is important to have the AC unit working for your
OneZone to regulate the room temperature. OneZone operation modes are:
- Cooling : OneZone damper will open when room temperature is higher than the set-point temperature selected.
- Heating : OneZone damper will open when room temperature is lower than the set-point temperature selected.
For switching the operation mode, short press on the current Operation Mode and all the available operation modes will be
displayed. The current operation mode will blink; select the desired operation mode.
USER MODES
Your OneZone can work operate either manually or automatically based on time
schedules. User modes are indicated as follows:
- Manual : You select manually at every moment the desired
temperature.
- Automatic : Commands your OneZone thermostat to follow a
previously stored time schedule.
You can swap from manual mode to automatic mode on your OneZone usage
simply by pressing on the shown icon.
Manual and automatic mode
Change from Off to On to activate and deactivate the OneZone temperature control.
When set to On, use selection arrows to set the desired temperature. Range available is from 65ºF to 85ºF with steps of 1ºF.
In automatic mode, stored times-schedules (see point User modes) on the OneZone thermostat will prevail. Change to automatic
mode by pressing on the manual mode icon , appearing the automatic mode icon .
Manual mode
On/Off icon
Operation mode
Selection arrows