28
EN
Mode
Demand
Control relays
Stop
Off
-
-
-
-
-
-
Cooling
Air
ON
-
ON
-
-
-
Radiant
ON
-
-
ON
-
-
Off
ON
-
-
-
-
-
Heating
Air
-
ON
-
-
ON
-
Radiant
-
ON
-
-
-
ON
Off
-
ON
-
-
-
-
Dry
On
ON
-
-
-
-
-
Off
ON
-
-
-
-
-
Ventilation
On
-
-
-
-
-
-
Off
-
-
-
-
-
-
•
2 pipes / 4 pipes
Important:
In order to optimize the production temperature of the air to water units, the
following combinations will not generate air demand in the production control board:
- Airzone 3.0 controller gateway (AZX6GTCxxx) in the Flexa 4.0 and Innobus Pro8 system main
control boards.
- Airzone communication gateway (AZX6QADAPTxxx) in the Flexa 4.0 and Innobus Pro8 system
main control boards.
- Airzone control gateway-Electromechanical unit (AZX6ELECTROMEC) in Flexa 4.0 and
Innobus Pro8 system main control boards.
- Gateway modules (AZDI6MCIFR [C/R] / AZDI6MCxxx [C/R] / AZDI6ZMOxxx [C/R]) in Acuazone
e Innobus Pro32 (v.4.4.0 or lower) systems (when configured as a zoning system or mixed
system).
For Acuazone and Innobus Pro 32 systems versions v.4.4.1 or higher:
In any configuration
of the Acuazone central operating logic, zones with air flow stage configured as (Direct
Expansion) DX will not generate air demand in the production control board. Remember that
in both zoned or mixed configurations, when the air flow stage of a zoned area is modified, the
same configuration will apply to the rest of the zones in the group.
Mode
Demand
Control Relays
Stop
Off
-
-
-
-
-
-
Cooling
Radiant
ON
-
-
ON
-
-
Off
ON
-
-
-
-
-
Heating
Radiante
-
ON
-
-
-
ON
Off
-
ON
-
-
-
-
Dew
Warning
Active
On
ON
-
ON
-
-
-
Off
ON
-
ON
-
-
-
•
RadianT*
*Only for Airzone RadianT365 system (AZRA6).
