Airzone Jump BASIC AZJ-12FT Assembly Instructions Manual Download Page 5

ASSEMBLY AND INSTALLATION 
   INSTRUCTIONS CONTINUED

WARNING

!

CARE AND MAINTENANCE 
          INSTRUCTIONS

WARNING

!

Inspect the trampoline and enclosure before each use and replace any worn,
defective or missing parts. The following conditions could represent potential
hazards:

1. Missing, improperly positioned, or insecurely attached frame padding.

2. Punctures, frays, tears, or holes worn in the bed or frame padding.

3. Deterioration in the stitching or fabric of the bed or frame padding.

4. Ruptured springs.

5. A bent or broken frame and/or support system.

6. A sagging bed or barrier.

7. Sharp protrusions on the frame or suspension system. (7.3.2.1)

The Trampoline and enclosure is NOT to be left outside in rain, snow or 
windy conditions. If such conditions occur please disassemble your 
trampoline and enclosure and store for future use in mild weather
conditions.

For safe use it is very important that the 
net be securely attached to the frame in 
the correct position prior to using the 
trampoline.

BEFORE connecting the bottom 

net with a cord to the D-rings at the edge of 
the mat.   

FIRST the net ring on top of the net needs 
to be placed into the plastic holders on top 
of the poles 

Summary of Contents for BASIC AZJ-12FT




















Reviews: