STEP 6 Non-LED MAXXFAN Dome
Using the supplied wire splices, connect the
Positive (+) 12VDC supply wire to the
MAXXFAN Dome
fan
wire marked “POS
12VDC” and the Negative (-) 12VDC supply
wire to the
MAXXFAN Dome
fan wire
marked “Neg. 12VDC”.
•
If the sleeve is needed, insert the
sleeve into the garnish ring positioning
the notch in the sleeve to line up the
wiring.
•
Raise the garnish ring to the ceiling
ensuring that the garnish ring is
centered over the fan opening.
•
If using the sleeve, the sleeve will
overlap the base that extends in the
opening. This will help center the
garnish ring in the opening.
•
Ensure that the wires are not pinched.
The wires should be routed on the
outside of the sleeve. The excess wire
should lay in the garnish ring to keep
them contained.
•
Secure the garnish ring to the ceiling
with the four (4) screws provided in the
small parts package.
•
Reconnect the main vehicle power to
the
MAXXFAN Dome
.
This completes the installation of
the MAXXFAN Dome exhaust fan.
