Airwheel H3TS+, User Manual

Page: 13 / 124

- 10 -
Note: During the folding process, you can stop folding by
turning the joystick or clicking any key.
Make sure the power button on the battery box is turned
on and the wheelchair is unfolded, then press the power
switch on the controller to be ready to drive or remote
control. Press it again to shut down the ready mode.
Power Switch
In the power-off state, press the button over 2 seconds,
the Wheelchair enters the extending/contracting mode.
Release it to contract. In the extending/contracting mode,
click the button to stop contracting if it is contracting.
When extending stops, click it to contract. In the ready
mode, remote control mode and riding mode, click the gear
button to decrease one gear.
Speed down / Fold
Remarks: The wheelchair cannot be turned on when it
is folded. You need to unfold the wheelchair and then it
could be turned on.
Press the button the buzzer will buzz; Release the button,
the buzzer stop buzzing.
Horn Button
Make sure both the power on the battery box and on the
controller are turned on, then press the headlight switch to
turn on the headlight, and press it again to turn off.
Headlight switch
In the power-off state, press the button over 2 seconds, the
Wheelchair enters the extending/contracting mode. Release it
to extend. In the extending/contracting mode, click the button
to stop extending if it is extending. When contracting stops,
click it to extend. In the ready mode, remote control mode and
riding mode, click the gear button to increase one gear.
Speed up / Unfold
In the extending/contracting mode, click the
button to stop extending or contracting. It enters
the shutdown state.
Remarks: without Any operation on joystick or
remote control for 5 minutes, the controller will
automatically shut down (screen off/ght off), and
you can re-operate the wheelchair by clicking
the power button on the joystick.
Stop folding / unfolding