23
Operation
(2) If the current temp. is displayed in Fahrenheit,set temp.
should be adjusted to 60°F in each mode(when energy saving
function is set currently, the cooling/dry mode will be the
lowest limit value of the energy saving function). Then press
key for 15s to switch to Celsius, the interface will display 16°C
(when energy saving function is set, its lowest limit value of
Celsius will be displayed).
(
1) Press the mode key to switch to the dry mode, and the
humidity will be shown in the temp. display area. The Up/Down
key is the humidity adjusting key.
(2) If Sw2 is set to be on, the temp. display area will display
the ambient temp. in all modes except for the dry mode,
which will display the ambient humidity. When in the state of
OFF→ON, mode shift to dry mode, set humidity adjustment in
dry mode, the set hum. will display statically, SET icon flashes
and after 3s, ambient hum. and ROOM icon display statically.
Humidity Function (Only valid for part of models)
