16
Operation
(1) If Sw5 is on, only the Up/Down swing will be involved in
function circulation. At this time SW7 is invalid.
(2) If Sw5 is off, swing type can be set by Sw7, when Sw7 is
off, only Up/Down swing valid, when Sw7 turns on, Up/Down
and Left/ Right swing valid. Only Up/Down swing is default.
①
If Sw7 is off (default): only Up/Down swing is available.
Press SET key to enter function circulation, Up/Down swing
icon flashing, then press SET key again to confirm with swing
icon statically displaying. If swing function is set, execute the
above operation to cancel.
②
If Sw7 is on: Up/Down swing and Left/Right swing are
available.
Press SET key to enter function circulation, Left/Right swing
icon flashing, then press Up/Down key to enter Up/Down
swing, with Up/Down swing icon flashing. Press SET key again
when swing icon flashing to confirm, with swing icon statically
display. If swing function is set, execute the above operation to
cancel.
③
If connecting to the salve wired controller, Sw7 dip code of
master and slave wired controllers should be set the same and
should match the actual wired controller unit.
Swing
