Airwell RCV03, Operation Manual

Page: 5 / 8

4
10. +/- Button
(1) This button is invalid in FAN mode;
(2) Press
/ button, temperature change 05°C; pressing and holding the button will change
quickly
11. HEATER
Press the button, and the remote control will display “ HEATER “
Press button again, the “ HEATER “ on the remote control will disappear, and the HEATER func-
tion will be turned off.
This function will be effective only in AUTO and HEAT mode.
12.MENU
Functional cycle: SELF-CLEAN→3D AIR (reserved) →FRESH→HEALTH AIRFLOW→IFP→ →
→IFP AC OFF→IFP AC ECO→ → → → → → → →10°C
heating (Only valid in HEAT mode)→°F/°C→SELF-CLEAN
(1) Press button, the current function to be set flashes;
(2) Press button again to set/cancel the current setting function in the above sequence If there is
no operation in 5 seconds, it will exit automatically
Note:
Individual flap control for Round-way cassette: press button to enter function loop to select the
corresponding function icon and press button to confirm the operation, then press the button
to select the airflow angles.
13. LOCK
Press the combination key and , and the remote control will display “ “ All buttons on the
remote control are invalid
Press the combination button again to unlock the button and the icon “
“ will disappear
Functional description