2
Functional description
1. ON/OFF Button:
Turning on the units:Press the
button to turning on the units
Note: The initial default operation mode is AUTO and then will display the mode before turning off
Press
button again to turn off the unit.
2. MODE
Press the
button every time, Function loop will be:
→
→
→
→
→
3. TURBO/QUIET
This function is valid under the mode of COOL and HEAT
Along with pressing the
button each time, it will display according to the loop of TURBO→QUIET
→ Cancel →TURBO. Under the function of TURBO / QUIET.
When "SLEEP" is set, the " TURBO " function is disabled and the " QUIET " function is effective.
4. HEALTH
(1) When turning on the units, press
button, the remote controller will display " HEALTH ", and
then press
button to cancel
(2) When turning off the units, press the
button to enter FAN mode and display " HEALTH "
5. TIMER
When the unit is in turning on status, users can only set the TIMER OFF, while in off status, users can
only set the TIMER ON
In Off status, press the
button to enter the TIMER ON adjustment process
In On status, Press the
button to enter the TIMER OFF adjustment process
When entering the timing adjustment process, timer ON/OFF icon and clock flash at the same time,
the initial default value is: 0:30 Press the
/
button once to increase or decrease the time for 30
minutes, and pressing and holding the button will speed up the adjustment
After the time adjustment is completed, press the
button again to confirm, the time static display,
and start the countdown
Summary of Contents for RCV03
Page 7: ......
