background image

7

Before calling the service  please check the listed  conditions in the followings which may correct the failure, saving time 
and money as well.

The air conditioner does not operate

Is the power cord connected to the power source?
Is the circuit breaker or fuse open or broken?

- Close the circuit breaker again or replace the fuse.

Is the power cut off?

- Turn on a lamp switch to check if there is a power cut off.

No cool air or reducing cool performance

Is there any error on the indicated temperature setting?
Is the indicated set temperature higher than the room temperature?

- Reset the indicated set temperature.

Does the sun shine directly into the room?

- Shade the sunlight with window curtain, etc.

Is the door or window open?

- Close the room’s doorways and  the window.

Are there any obstacles blocking the ventilation of the air inlet or outlet of the air conditioner?

- Remove the obstacles.

Is the extracting fan in the room operating continuously?
Is the air filter blocked?

- Replace the filter.

Correct installation mat reduce vibration and noise.

This unit produces lower noise, but incorrect installation (especially when the unit is directly installed   on the  glass 
window) may result in larger vibration noise.  Therefore, we recommend that the installation of this unit be conducted by 
the special air conditioner installation team, in accordance with the installation manual we provide with the product.

PRIOR TO CALLING FOR SERVICE

RCA INST MANUAL

Summary of Contents for MAY 110RC












Reviews: