10
Operation instruction
OFF timing: when a set time has elapsed, the unit stops running.
ON timing: when a set time has elapsed, the unit starts.
1.Press "TIME" switch.
ON
OFF
ON
OFF
OFF
CYCLE
ON
no display
The display changes with the following
sequence:
2.Set up "TIMER"
When timing ON or timing OFF flickers,
press "
" or "
" to regulate the time
Press"
"or "
" set up ON/OFF time.
The setting time increases ten minutes each
time you press "
" switch.
The setting time decreases ten minutes
each time you press "
" switch.
When setting timing ON and timing OFF at
the same time, press "timing" switch to
change the setting item.
The shorter setting time will be carried out firstly.
If the ON timing and OFF timing are the same, the setting is invalid.
Even in timing condition, you may start or close the unit through pressing "ON/OFF" switch.
Note
parts of wired controller explanation :
1.The unit starts or stops at the setting time. Meanwhile, it displays the timing time.
2."ON Timing, OFF timing and circulation"means that the unit is on and off at the setting time
everyday.
Press
“
ON/OFF
”
switch firstly,
and set up operation mode.
Please regulate the clock in
advance before using the
timing function.
3.Time setting is achieved.
Press"SET"switch.
If you want to change the timing mode to
normal operation, press "timing" until there
is no timing display. When the timing is
invalid, the mode is in normal operation.
Cancel timing
HIGH
ROOM TEMP.
1
2
3
COOL
FAN
OPERATION
MODE
TIMER
ON
MODE
FAN
SWING
HEALTH
CLOCK
TIMER
CHECK
FILTER
RESET
ON/OFF
SET
RECOVERY
TEMP
TIME
Timing setting
Summary of Contents for AWSI-DBV018-N11
Page 37: ......
