No
Fault Name
Fault Description
Corrective Action
exceeded
of its outdoor condition
limitiations:
Cooling: >46
q
C , <-11
q
C.
Heating: >30
q
C , <-18
q
C.
Indication only, no action.
exceeded. If not, check OAT
thermistor, if OK, check no
obstructions to outdoor air path.
13.4.3
Fault Code for Indoor unit
Note
: Indoor unit diagnostics can be viewed by the outdoor unit display board (
13.4
).
The below procedure is for viewing the indoor unit codes via the indoor unit led display.
Pressing Mode button for more than 5 seconds will activate diagnostic mode by the
acknowledgment of 3 short beeps and lighting of COOL and HEAT LED’s.
When Indoor diagnostics is displayed, all four LED’s (STBY, Operate, Filter, TMR) are on.
Entering diagnostics in STBY mode allows only viewing of status (fault-display).
In diagnostic mode, system problems / information will be indicated by blinking of Heat & Cool
LED’s.
The coding method will be as follows:
Heat led will blink 5 times in 5 seconds, and then will be shut off for the next 5 seconds. Cool Led
will blink during the same 5 seconds according to the following table:
TROUBLESHOOTING
1
3
-10
SM
HJD
DCI 1-A GB
9
Summary of Contents for AW-HJD009-N11
