11
Alarm Function Programming Procedure
1. Press
ESC
one or more times until the Main Menu appears,
with
VIEW WEIGHTS
blinking.
2. Select
ALARMS
If PIN is needed for access, enter it at this time.
3. Select
SET ALARMS
4. Select
ALARM 1
5. Select one of
GVW, NET ALM 1, TRCTR ALRMS1
, or
TRLER ALRMS1
6. Depending on the previous step:
• select from
GVW ALARM
and
NET ALARM
;
• or from
STEER ALARM
and
DRIVE ALARM
;
• or from
TRLR WARN 1
and
TRLR ALARM 1
7. Select
WARN WT 1
or
ALARM WT 1
for the chosen alarm.
Using the up/down arrows ▲ or ▼ scroll to the desired
warning or alarm weight, then press
ENTER
8. Press
ESC
as needed to start setting any additional desired
alarms. Press
ESC
repeatedly to return to previous menu or
the main menu. Repeat this procedure for
ALARM 2
if used.
Turning The Alarm Feature ON or OFF
1. Press
ESC
one or more times until the Main Menu appears,
with
VIEW WEIGHTS
blinking
2. Select
ALARMS
If PIN is needed for access, enter it at this time
3. The bottom line gives the state of the alarm feature, “(Now
ON)” or “(Now OFF).” Select
TURN ON/OFF
to change this
state to its opposite.
