9
Turning off the guided Instructions - How-To-Weigh
How-To-Weigh instructions are displayed on the tractor scale in
rotation with the actual weight screen. To turn off these instructions off:
1. Press
ESC
one or more times until the Main Menu appears,
with VIEW WEIGHTS blinking
2. Select
PRINT,SETUP
3. Select
SYSTEM SETUP
4. Select
SYS CONFIG
5. Select
DISPLY SETUP
6. Select
SHOW / HIDE
7. Select
SHOW HELP
8. Select
HIDE HELP
to turn off the How-To-Weigh instructions.
Press
ESC
repeatedly to return to the main menu
Creating a PIN
When the trailer scale PIN is set to 0, the operator will not need to enter
a PIN to access the PROGRAM menu functions. Setting a PIN into
the LoadMaxx Tractor Scale will eliminate tampering with that scale’s
CALIBRATION, SCALE TYPE, and PIN settings. After calibration, fleets
with both tractor and trailer scales should develop a fleet PIN policy to
protect the calibration settings from tampering.
To set a PIN:
1. Select
PRINT,SETUP
2. Select
SYSTEM SETUP
3. Select
SYS CONFIG
4. Select
SET PIN #
5.
Using the up/down arrows ▲ or ▼ scroll to the desired PIN, then
press
ENTER
. Press
ESC
repeatedly to return to main menu
The new PIN is now entered into the scale. To change the PIN later,
repeat these steps and change the setting. Setting the PIN to zero will
reset the scale’s PIN to its original status of No PIN Needed.
Note:
that once you gain PIN access by entering the PIN correctly, you
will retain that access until the scale has a power cycle.
