Setup Guide
Connect the micro USB
end of the cable to the
Speck’s micro USB input
Try to ensure the Speck screen is visible at all times
Make sure there is nothing
blocking the air intake at the
bottom of the Speck
Place the Speck on a
flat, hard surface, away
from direct sunlight
Connect the cable to the
USB power adapter and
plug into a wall outlet
The Speck is manufactured under license from Carnegie Mellon University
Your Speck Data
You have complete ownership and control over
your Speck data! We offer tools that enable you to
explore, analyze and share your data as you see fit.
Choose one of two ways to access your Speck data:
1. Periodic data download to a personal computer
2. Continuous data upload to the cloud
Note: Your Speck can store up to about 2-years of data on the
device itself. However, each time you download or upload data, that
information will be removed from your Speck’s onboard memory.
To register your Speck and explore your data:
1. Visit: specksensor.com/software
Note: Check out our video tutorials when you visit this site!
2. Download and install our free Chrome Speck app
Note: Chrome is only required for this initial setup. Your Speck data
can then be accessed through any web browser.
3. Connect your Speck to your computer via the USB
cable and launch the app
4. Choose to either download your data OR
configure your Speck to upload data to the cloud
5. Quit the app and explore your air quality!
