AirTies WAV-180, User Manual

Page: 14 / 50

2.2.
Installation Settings
Completing the hardware connections in the previous section is necessary before modifying the
installation settings. After the hardware setup is complete, turn the WAV-180 on and wait about 30
seconds for the router to initialize.
You can modify the installation settings in one of two ways:
1. By using the Easy Setup CD with animated instructions or,
2.By using the Web User Interface Both methods are described
in the following sections.
2.2.1.
AirTies WAV-180 ADSL Settings Using the Easy Setup CD
The AirTies ADSL Utility Software provides you with the easiest way to complete the installation of your
router and activation of its ADSL access.
Once the cabling is completed, insert the Easy Setup CD into the CD drive of your PC. The AirTies
ADSL Utility Software Installation program will start automatically. If it does not start automatically,
please run the program “installation.exe” (or “kurulum.exe”) on the CD.
A sequence of animated instructions will guide you through the cabling of your WAV-180 router. Please
verify that you have connected the cables as shown in this presentation.
You can skip this animation at any time and proceed with setup by clicking the Setup link in the upper
right hand corner of the window.
1. Click “Next>” in the “AirTies ADSL Utility Setup Wizard” window.
2. In the section labeled “ADSL User Information”
enter your
• ADSL username
• ADSL password
3. In the section labeled “Customer Information”
enter your
• First and Last name
• Phone number
• E-mail address
If you do not know or do not remember your
ADSL username or password, contact your
ADSL service provider to get these values.
Do not change the value in the “Protocol” field
(PPPoE) unless you are specifically advised to
do so by your ADSL service provider.
Click “Save”.
12
AirTies WAV-180 User Manual