AirTek Twister CP Gold User Manual Download Page 2

 

INDEX 

 
Introduction………………………………….. 
Preparing For Flight..……………………….. 
 

1. Unpack you Twister CP Gold..…… 

Battery & Charger…………………..……….. 
 

2. Connect Charger to Power…….…. 

 

3. Connect Battery to Charger………. 

Lithium Polymer Battery Safety……………. 
 

Before Charging Li-Po Batteries…. 

 

Charging Li-Po Batteries………….. 

 

Using Li-Po Batteries……………… 

Final flight preparation……………………… 
 

4. Installing the Battery………………. 

 

5. Rotor Blades Check……………….. 

 6. 

Linkage 

Check……………………... 

 

7. Switch on Transmitter…………….. 

 

8. Range Check………………………. 

Control Check……………………………….. 
Advanced Flying Features…………………. 
Flight Training Guide……………………….. 
Troubleshooting……………………………... 
Spare Parts & Option Parts………………… 
Twister CP Gold Exploded View………….. 
 




















10 
14 

 

Vital Safety Information 

• 

If you have no experience flying R/C 
helicopters, it is highly recommended 
that you seek advice from your supplier 
and/or an experienced R/C helicopter 
pilot. 

• 

Read all instructions carefully prior to 
assembling and before flying the heli-
copter. Seek advice should any infor-
mation be unclear. You assume all risk 
and responsibility when using this 
model. 

• 

Keep well clear of rotating blades to 
avoid serious injury.  

• 

Never wear loose clothing when operat-
ing model helicopters 

• 

Always wear protective eyewear when 
operating model helicopters. 

• 

Only fly in areas where it is safe to do 
so and in areas where the flying of R/C 
models is permitted. 

• 

Do not fly near people, animals, build-
ings or any obstacles. 

• 

Do not fly your model at head height. 

• 

Do not fly your model within 5 metres 
of yourself or any person. 

 

GUARANTEE/WARRANTY 

J.Perkins Distribution Ltd and Model Engines (Aust.) Pty. Ltd. Guarantee this product to be free from         
manufacturing and assembly defects for a period of one year from the time of purchase. This does not affect 
your statuary rights. This warranty is not valid for any damage or subsequent damage arising as a result of a 
crash, misuse, modification or for damage or consequential damage arising as a result of failure to observe the 
procedures outlined in this manual. Operation of this model is carried out entirely at the risk of the operator. 
Please note that, whilst every effort is made to ensure the accuracy of instructions and material included with 
this product, mistakes can occur and neither J.Perkins Distribution Ltd/Model Engines (Aust.) Pty. Ltd nor it’s 
distributors will be held liable for any loss or damage arising from the use of this model or for any loss or   
damage arising from omissions or inaccuracies in the associated instructions or materials included with this 
product. 
We reserve the right to modify the design of this product, contents and manuals without prior notification. 
© 2008 J.Perkins Distribution Ltd, Lenham, Kent, UK ME17 2DL.   www.jperkinsdistribution.co.uk 
Model Engines (Aust.) Pty. Ltd., Noble Park, Victoria 3174, Australia.  www.modelengines.com.au 
All rights reserved. E&OE 

CRASHES & SPARE PARTS 

The Twister CP Gold has been designed to be strong and easy to repair, however, should the heli-
copter crash, there is a chance that parts will be damaged. In the event of a crash, it is important that 
the helicopter be thoroughly checked before undertaking further flights to ensure that no danger 
could be posed to yourself, bystanders or property. If the structural integrity of any part is in doubt, 
the part should be replaced. Crash damage is NOT covered by warranty. 
Use the exploded view at the rear of this manual, along with the listed part numbers, and contact 
your hobby supplier for the required parts. 

Summary of Contents for Twister CP Gold

















Reviews: